Было topic simple machines. Методическая разработка занятия по английскому языку на тему "Машины и работа" (3 курс)

HanicalSimple Machines and its Mechanical Advantage What are Simple Machines ? What do we mean by Mechanical Advantage? Simple Machines * creates a greater output force than the input force Therefore since work is performed by applying a force over a distance, with the use of these machines we can do more work with lesser effort than working with our bare hands. In short, they make work easier. Mechanical Advantage * The Ratio between the input force and the output force. * The measure of the force amplification achieved by using a tool, mechanical device or machine system. Anyway what is input and output force? Input refers to the force you applied while output refers to the resultant force the object has from the input force. Example: I pushed a ball with 10 N of force, it is rolling with 10 N of force. I input 10 N into it, now it is outputting 10 N. The Six Classical Simple Machines The Lever(French word that means “to raise”) * A simple machine that allows you to gain a mechanical advantage in moving an object or in applying a force to an object. It is considered a "pure" simple machine because friction is not a factor to overcome, as in other simple machines . Part | Description | Fulcrum | Is where a solid board or rod can pivot...

Simple Machines Examples With Pictures Essay

Applied Force Other First Class Lever Examples Applied Force Action Force Spring Load Force Action http://library.thinkquest.org/J002079F/lever.htm Third Class Lever Effort or Applied Force Egg ready to be launched Release hook Compressed Spring Load or Resistance Fulcrum Applied force can be in any direction http://www.usoe.k12.ut.us/curr/science/sciber00/8th/machines /sciber/lever3.htm http://www.usoe.k12.ut.us/curr/science/sciber00/8th/machines /images/tweezer.gif http://www.usoe.k12.ut.us/curr/science/sciber00/8th/machines /images/base.jpg Inclined Plane An inclined plane is a slanted surface used to raise an object. An inclined plane decreases the size of the effort force needed to move an object. However, the distance through which the effort force is applied is increased. The Big Rock rolling downhill with gravitational force IS NOT an example of an inclined plane. The inclined plane gives you mechanical advantage AGAINST gravity. Big Rock http://www.sirinet.net/~jgjohnso/simple.html An example of how an Inclined Plane can be used to raise a mass to activate another simple machine Egg ready to be launched By First Class Lever F Big Rock Force pushing (or pulling) Big Rock up the hill Inclined Plane First Class Lever Wedges Pulleys Wedges are moving inclined planes that are driven under loads to lift Pulleys use a wheel or set of wheels around which a single length (not...

Activity 1.1.2 Simple Machines Practice Problems Answer Key Essay

Activity 1.1.2 Simple Machines Practice Problems Answer Key Procedure Answer the following questions regarding simple machine systems. Each question requires proper illustration and annotation, including labeling of forces, distances, direction, and unknown values. Illustrations should consist of basic simple machine functional sketches rather than realistic pictorials. Be sure to document all solution steps and proper units. All problem calculations should assume ideal conditions and no friction loss. Simple Machines – Lever A first class lever in static equilibrium has a 50lb resistance force and 15lb effort force. The lever’s effort force is located 4 ft from the fulcrum. 1. Sketch and annotate the lever system described above. 2. What is the actual mechanical advantage of the system? Formula Substitute / Solve Final Answer AMA = 3.33 3. Using static equilibrium calculations, calculate the length from the fulcrum to the resistance force. Formula Substitute / Solve Final Answer A wheel barrow is used to lift a 200 lb load. The length from the wheel axle to the center of the load is 2 ft. The length from the wheel and axle to the effort is 5 ft. 4. Illustrate and annotate the lever system described above. 5. What is the ideal mechanical advantage of the system?...

Compound Machine

Our compound machine , consisting of mainly three different simple machines , is a crane designed to multiply your force in order to effectively and efficiently lift the four 75 kg up a steep hill. Our machine starts off with the gear train. As you rotate the handle, all the gears rotate along as well. Since we connected the rope of the pulley to our gears, it then puts the pulley system into action. We created movable pulleys throughout the arm until the tip to stabilize our rope and also give us a mechanical advantage. At the top section of our arm we created a lever to support the load. This magnifies our effort force since a combination of all the mechanical energy is being carried out. With the pulley system, connected all the way to the gear train, and the lever working all together, our mechanical advantage is increased greatly. We created a series of gear trains to not only increase our advantage of torque in the machine but also to increase the mechanical advantage rather than losing efficiency due to friction and thermal energy. Doing this, we magnified our effort force onto the load. Also, in the gears, we arranged it so that the input gear and the output gear gave us a low gear ratio and the idler gears in between. It also allows us to control the direction of our force in the machine . Since it is linked to the pulley, we can control the direction of the rope. However, it only...

Essay

SAMPLE PROBLEMS: . Simple Machines – Lever A first class lever in static equilibrium has a 50lb resistance force and 15lb effort force. The lever’s effort force is located 4 ft from the fulcrum. Sketch and annotate the lever system described above. | What is the actual mechanical advantage of the system? Formula | Substitute / Solve | Final Answer | | | AMA = 3.33 | * Using static equilibrium calculations, calculate the length from the fulcrum to the resistance force. Formula | Substitute / Solve | Final Answer | | | | A wheel barrow is used to lift a 200 lb load. The length from the wheel axle to the center of the load is 2 ft. The length from the wheel and axle to the effort is 5 ft. Illustrate and annotate the lever system described above. | What is the ideal mechanical advantage of the system? Formula | Substitute / Solve | Final Answer | | | | * Using static equilibrium calculations, calculate the effort force needed to overcome the resistance force in the system. Formula | Substitute / Solve | Final Answer | | | | A medical technician uses a pair of four inch long tweezers to remove a wood sliver from a patient. The technician is applying 1 lb of squeezing force to the tweezers. If more than 1/5 lb of force is applied to the sliver, it will break and become difficult to remove. Sketch and annotate the lever system...

Essay on Simple Machines

...Simple machines are extremely important to everyday life. They make stuff that is normally difficult a piece of cake. There are several types of simple machines . The first simple machine is a lever. A lever consists of a fulcrum, load, and effort force. A fulcrum is the support. The placing of the fulcrum changes the amount of force and distance it will take in order to move an object. The load is the applied force. The effort force is the force applied on the opposite side of the load. Levers can be placed in three classes. The 1st class levers are objects like pliers where the fulcrum is at the center of the lever. The 2nd class of levers are objects that have the fulcrum on the opposite side of the applied force like a nutcracker. The 3rd and final class is objects like crab claws. These objects of the load at one end and the fulcrum on the other. An inclined plane is another simple machine . Inclined planes are also known as ramps. Ramps make a trade off between distance and force. No matter how steep the ramp, the work is still the same. A winding road on a mountain side is a good example of a ramp. Some simple machines are modified inclined planes. The wedge is one of those machines . One or two inclined planes make up a wedge. Saws, knives,needles, and axes are made from wedges....

Simple Machines Essay

...Simple Machines Definitions: Machine - A device that makes work easier by changing the speed , direction, or amount of a force. Simple Machine - A device that performs work with only one movement. Simple machines include lever, wheel and axle, inclined plane, screw, and wedge. Ideal Mechanical Advantage (IMA)- A machine in which work in equals work out; such a machine would be frictionless and a 100% efficient IMA= De/Dr Actual Mechanical Advantage (AMA)- It is pretty much the opposite of IMA meaning it is not 100% efficient and it has friction. AMA= Fr/Fe Efficiency- The amount of work put into a machine compared to how much useful work is put out by the machine ; always between 0% and 100%. Friction- The force that resist motion between two surfaces that are touching each other. What do we use machines for? Machines are used for many things. Machines are used in everyday life just to make things easier. You use many machines in a day that you might take for granted. For example a simple ordinary broom is a machine . It is a form of a lever. Our country or world would never be this evolved if it wasn"t for machine . Almost every thing we do has a machine involved. We use machines ...

Simple Machine A machine with few Essay

... Simple Machine : A machine with few or no moving parts. Simple machines make work easier. Examples: Screw, Wheel and Axle, Wedge, Pulley, Inclined Plane, Lever Compound Machine : Two or more simple machines working together to make work easier. Examples: Wheelbarrow, Can Opener, Bicycle Inclined plane: A sloping surface, such as a ramp. Makes lifting heavy loads easier. The trade-off is that an object must be moved a longer distance than if it was lifted straight up, but less force is needed. Examples: Staircase, Ramp Lever: A straight rod or board that pivots on a point known as a fulcrum. Pushing down on one end of a lever results in the upward motion of the opposite end of the fulcrum. Examples: Door on Hinges, Seesaw, Hammer, Bottle Opener Pulley: A wheel that usually has a groove around the outside edge for a rope or belt. Pulling down on the rope can lift an object attached to the rope. Work is made easier because pulling down on the rope is made easier due to gravity. Examples: Flag Pole, Crane, Mini-Blinds Screw: An inclined plane wrapped around a shaft or cylinder. This inclined plane allows the screw to move itself or to move an object or material surrounding it when rotated. Examples: Bolt, Spiral Staircase Wedge: Two inclined planes joined back to back. Wedges are used to split things....

A simple machine is a mechanical device that consists of a minimum of moving parts but yet can create an improvement of the output over the input. The improvement could be creating a mechanical advantage or simply changing the direction of the output. Mechanical advantage is the increase of force, distance or speed from the input value.

Around the 16th century, the classic list of simple machines was determined. The list consisted of the lever, wheel and axle, pulley, inclined plane, wedge, and screw.

These simple machines can be broken into three classifications: lever simple machines, rotating simple machines, and inclined plane simple machines.

Questions you may have include:

• What do lever simple machines do?
• What do rotating simple machines do?
• What do inclined plane simple machines do?

This lesson will answer those questions. Useful tool: Units Conversion

Lever simple machines

The lever simply consists of a rod or board that pivots on a fulcrum, creating a mechanical advantage or a change in direction.

The lever is a classic simple machine that achieves a mechanical advantage according to the ratio of the output or load arm of the lever divided by the input or effort arm.

The mechanical advantage of a lever can concern force, distance, or speed of the output.

The efficiency of the lever is very high, since the loss due to friction at the fulcrum is low.

Rotating simple machines

Rotating simple machines include rollers, wheel and axle, crank, and pulley.

Rollers

The wheel or roller by itself can make it easier to move objects by overcoming friction.

Wheel and axle

When an axle is added to a wheel, a torque on the axle increases the speed of the outer surface of the wheel. Likewise, turning the wheel from its outer edge increases the force applied from the axle.

Crank

A crank is like a wheel and axle. You can push on the handle of a crank, and it will create a twisting force or torque on the axle. This is a variation of the wheel and axle.

Pulley

A pulley is a wheel and axle, that uses a rope to lift objects. A major purpose of a pulley is to change the direction of the input force. You can pull down one a pulley rope, and the rope will lift the object upward.

Complex set of pulleys

A complex set up pulleys, such as a block-and-tackle configuration, can result in a mechanical advantage. The question is that if it is a complex set, is it still a simple machine? Probably not.

Inclined plane simple machines

Variations of an inclined plane include a ramp, wedge, and screw.

Ramp

The inclined plane or ramp makes raising a weight to a given height easier, according to the angle of the incline. Unfortunately, the resistive force of friction from sliding the object on the ramp can negate the mechanical advantage.

Variations of the inclined plane are the wedge and screw.

Wedge

Although a wedge is considered a simple machine, it is really a special application of an inclined plane.

Screw

The screw is really an inclined plane that is wrapped around a shaft. Turning the shaft around its central axis transforms rotational motion and torque into axial motion and force.

A screw can also act like a wedge, forcing itself into a softer material.

Summary

Simple machines usually exchange using a smaller force over a greater distance to move a heavy object over a short distance. The work required is the same, but the force required is less. The are also simple machines that help to reduce the resistance of friction or such.

Make it your mission to benefit your community

• Distribute small toy cars that have wheels joined by axles to groups of students. Kick-start a discussion with some questions about the toy car mechanics, such as: How do these toy cars move? How are the wheels on each side of the car joined to each other?
• Have a student volunteer point to the rod that holds the two wheels together. Explain that the bar that joins two wheels is called an axle .
• Tell students that they will be learning about wheels and axles.
• Hold up the doorknob, explaining that it is an everyday example of a wheel and axle.
• Challenge the students to help you identify the wheel and axle in the doorknob. Listen as different students call out their guesses.
• After some speculation, tell students that the knob that turns is the wheel. The inner rod that is attached to the knob is the axle.
• Demonstrate how the wheel and axle works by turning the knob (wheel). That turns the inner rod (axle) and moves the latch, to open the door.

Guided Practice

• To consolidate student thinking, set up activity stations with play dough and a rolling pin.
• Let students practice flattening the dough with the pin.
• Guide them to express these understandings: The rolling pin is a wheel and axle. When you push on the handles (the axle) the wheel turns and flattens out the dough.
• Challenge students to think of other common machines that have one wheel like the rolling pin. Great examples include a wheelbarrow, a top, and a playground merry-go-round.

Independent working time

• Pass out a copy of the Wheel and Axle worksheet to each student to complete independently.
• Walk around the classroom to offer support to students who get stuck.

Differentiation

• Enrichment: Have students who need more of a challenge read a history of other simple machines, and fill out an accompanying word search.
• Support: Put students who need more support into pairs to complete the Wheel and Axle worksheet.

Assessment

• Collect the worksheets that the students have filled out, and correct them using the Wheel and Axle answer sheet.

Review and closing

• In summary, remind students that the rolling pin is a wheel and axle. When you push on the handles (the axle) the wheel turns and flattens out the dough.
• Challenge students to think of other common machines that have one wheel like the rolling pin, such as a wheelbarrow, top, and merry-go-round.
• Remind your class that the wheel and axle is only one of six common simple machines that help things move. For homework or additional independent work, consider encouraging students to learn more about other kinds of simple machines.

A lever is a simple machine that allows you to gain a mechanical advantage in moving an object or in applying a force to an object. It is considered a "pure" simple machine because friction is usually so small that it is not considered a factor to overcome, as in other simple machines.

A lever consists of a rigid bar or beam that is allowed to rotate or pivot about a fulcrum. An applied force is then used to move a load. There are three common types or classes of levers, depending on where the fulcrum and applied force is located.

The mechanical advantage is that you can move a heavy object using less force than the weight of the object, you can propel an object faster by applying a force at a slower speed, or you can move an object further than the distance you apply to the lever.

Questions you may have include:

• What are the parts of a lever?
• What are the three types or classes of levers?
• What are the uses for a lever?

This lesson will answer those questions. Useful tool: Units Conversion

A typical lever consists of a solid board or rod that can pivot about a point or fulcrum . Since humans usually provide energy to levers, "effort" and "load" are often used instead of input and output.

An input force or effort is applied, resulting in moving or applying an output force to a load .

The distance from the applied force or effort force to the fulcrum is called the effort or input arm and the distance from the load to the fulcrum is called the load or output arm .

Since there is typically a very small amount of friction at the fulcrum, overcoming friction is not a factor in a lever as it might be in another simple machine like a ramp or wedge. Thus, we consider a lever a pure simple machine.

Lever configurations

There are three types or classes of levers, according to where the load and effort are located with respect to the fulcrum.

Class 1

A class 1 lever has the fulcrum placed between the effort and load. The movement of the load is in the opposite direction of the movement of the effort. This is the most typical lever configuration.

Class 2

A class 2 lever has the load between the effort and the fulcrum. In this type of lever, the movement of the load is in the same direction as that of the effort. Note that the length of the effort arm goes all the way to the fulcrum and is always greater than the length of the load arm in a class 2 lever.

Class 3

A class 3 lever has the effort between the load and the fulcrum. Both the effort and load are in the same direction. Because of the configuration, the fulcrum must prevent the lever beam from moving upward or downward. Often a bearing is used to allow the beam to pivot.

Note that the length of the load arm goes all the way to the fulcrum and is always greater than the length of the effort arm in a class 3 lever. The result is a force mechanical advantage less than 1.

Uses for a lever

The reason for a lever is that you can use it for a mechanical advantage in lifting heavy loads, moving things a greater distance or increasing the speed of an object.

Increase force

Increase distance moved

You can increase the applied force in order to lift heavier loads.

Increase speed

You can increase the speed that the load moves with Class 1 or Class 3 levers.

Summary

A lever is a simple machine that allows you to gain a mechanical advantage. It consists of a consists of a rigid bar or beam that is allowed to rotate or pivot about a fulcrum, along with an applied force and load. The three types or classes of levers, depend on where the fulcrum and applied force is located.

Uses for a lever are that you can move a heavy object using less force than the weight of the object, propel an object faster by applying a force at a slower speed, or move an object further than the distance you apply to the lever.

Leveraging gives you an advantage